Moog PFH10 SERIES Operations Instructions

www.moogvideolarm.comP F H 1 0Outdoor Tubular Dust-Proof and Pressurized Environmental HousingsInstallation and Operation Instructions for the followi

Depress the ll valve. Drain all air from the housing and repeat 3 times to remove all moisture.• Presione la válvula del terraplén. Salga todo el

36131411172111741081216515Replacement Parts ListPFH10DESCRIPTION PART #1 RPVL3857 BACK COVER2RPVL3863BACK COVER GASKET3RPVALV12TANK VALVE4 RPCA3682 CO

Product Registration/WarrantyThank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highes

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONSUNPACKINGSERVICE1 Read these instructions.2 Keep these instructions. 3 Heed all warnings 4 Follow

Limited Warranty for Moog Videolarm Products Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:PROD

P F H 1 0Value FeaturesHand Holdunderlaid grip pointMulti-PlaneAdjustable SunShield position to protect against glare on lensCable Feed Throughhides a

Contents of Box PFH1024Vac 29W (No camera) 12Vdc 11W (No camera) 24Vac 29W (Ninguna cámara) 12V

Mounting Straps Sold Separately If you are running a conduit to the housing instead of through mount wiring, rst install the appropriate tting to th

Crimp the connectors as needed. Then use cable ties on the nipples to secure device, leave extra cable.• Prense los conectadores según lo necesitado

In order to rotate the rear cover, slightly loosen the screw marked (A) and completely loosen the screw marked (B). Then make all of the nessecary wi

When pressurizing unit be sure to set the gauge or regulator slightly above the housing pressure target of 5-7psi (0.35-0.5bar).• Al presurizar la