5KHz20KHZ20Hz320Hz80HzFINE TUNEMIDIFREQMIXMODENVELOPEVCO 2FILTERVCARELEASELFO RATEVCO LFO AMTVCF LFO AMTATTACKDECAY/RELEASESUSTAINGLIDEGLIDE RATEVCO 1
INPUT/OUTPUT PANELThe back panel provides all of the input and output connections. In additionto AUDIO INPUT/OUTPUT jacks, there are CV and GATE input
MIDI OPERATIONSMIDI CHANNELThe Minitaur sends and receives on a single MIDI channel. By default, the Minitaur is set to MIDI Channe
SECTIONMOD(MODULATION)OSCILLATORSMIXERFILTERFUNCTION CC VALUE/RANGECONTROL/PARAMETERLFO RATE Adjusts the LFO frequency3(MSB)35(LSB)0-1270-1270-1270-63
SECTIONENVELOPESMODWHEELRESPONSEPITCH WHEELRESPONSECONTROL(SEE NOTE 1)KEYBDRESPONSEVOLUMEFUNCTION CC VALUE/RANGECONTROL/PARAMETERVCF ATTACK Adjusts th
APPENDIX B - SERVICE AND SUPPORT INFORMATIONMOOG LIMITED WARRANTYMoog Music warrants its produc ts to be free of defects in materials andworkmanship f
COMPLEX TIMBRAL MODULATION 1. Using a 1⁄4” patch cable, connect the CP-251 LFO Triangle output to an Attenuator Input 2. With another 1⁄4” patch
APPENDIX E - SPECIFICATIONSREAR PANEL: •12VDC POWER INLET: Accepts +12VDC, tip positive •MONOPHONIC AUDIO IN (1/4” TS-UNBALANCED) Accepts +4
PRESETSYour Minitaur comes loaded with 94 presets in its internal memory. Up to 128 presets can be saved and loaded using the free Minitaur Editor, or
CV MAPPINGIn Firmware v2.0 and above, the PITCH, VOLUME, and GATE Controller Inputs on Minitaur can be re-mapped to control otherparameters. This allo
MINITAURCongratulations on your new Minitaur Analog Bass Synthesizer, a powerful, compact Moog synthesizer with a classic one knob per function design
UNPACKING AND INSPECTIONCHECK THE CONTENTS IN THE SHIPPING CARTONThe Minitaur is shipped with the following items: 1. The Minitaur Analog Bass Synt
POWER UPApply power to the Minitaur and to your MIDI controller.CONNECT TO AMPLIFIERSet the Minitaur’s volume control to minimum before connecting to
7HEADPHONE OUT1/8” Stereo Headphone Output.AUDIO OUT1/4” Unbalanced Output.AUDIO INExternal Audio Input for processing audio through the Mixer and Fil
BASIC OPERATIONThe Minitaur responds to MIDI messages on both DIN and USB MIDI Inputs. In addition, Minitaur’s knobs and switches transmit MIDI Contro
The FILTER is a classic Moog 24dB/Octave Low-Pass Filter design with resonance. It has controls for CUTOFF frequency which determines the range of fre
way to self-oscillation.EG AMOUNT (CC# 22):Determines how much the Filter Envelope Generator (EG) adds to or subtracts from the Filter Cutoff control
MODULATION is an important part in the crea-tion of musically-expressive sounds. The Minitaur’sMODULATION section provides an LFO with adjustable RATE
Comments to this Manuals