Moog MP-201 Technical Information download pdf (Page 17)

setting, and 13-24 are accessed by the PATTERN switch in the MIDS

voicing setting. Using MIDI Program Change Messages values 0-23

accesses the MuRF patterns 1-24. This has no impact on the position of

the FREQ switch, so that using MIDI, you can use any of the 24 patterns

with either voicing, overriding the front panel PATTERN and FREQ

switch positions. Moving the PATTERN rotary switch or the FREQ

switch restores the MIDI MuRF to the state of those front panel controls.

CONTROLLING PARAMETERS WITH MIDI CC MESSAGES

The following MIDI MuRF parameters can be controlled with MIDI

CC messages:

ENVELOPE: CC1 (Mod Wheel). When the MF-105M receives a CC1

message on the MIDI channel that is assigned, the value of the CC1

message overrides the setting of the front panel ENVELOPE control and

any steady voltage at the ENVELOPE control input. Moving the front

panel ENVELOPE control or modifying a voltage at the ENVELOPE

control input restores this parameter to its front panel state.

DRIVE: CC2 (Foot Controller). When the MF-105M receives a CC2

message on the MIDI channel that is assigned, the value of the CC2

message overrides the setting of the front panel DRIVE control. Moving

the front panel DRIVE control restores this parameter to its front panel

state.

LFO RATE/SWEEP: CC3. When the MF-105M receives a CC3 message

on the MIDI channel that is assigned, the value of the CC3 message

overrides any steady voltage present at the LFO/SWEEP input and shifts

the Filters’ frequencies based on the setting of the LFO ON/OFF switch.

When the LFO is ON, the rate of the LFO is changed as with the LFO/

SWEEP control input: .08 Hz to 20 Hz. When the LFO is OFF, CC3

Values shift the 8 lters’ frequencies.

OUTPUT: CC7 (Volume). When the MF-105M receives a CC7 message

on the MIDI channel that is assigned, the value of the CC7 message

overrides the setting of the front panel OUTPUT control. Moving the

front panel OUTPUT control restores this parameter to its front panel

state.

page 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Moog MP-201 Technical Information Page 17