Moog MP-201 Technical Information download pdf (Page 25)

page 25

Figure 13 - Power Input Connector

TECHNICAL INFORMATION

NOTE: The following information is intended for use by people who

understand analog electronic circuitry and have enough practical

experience to interconnect sophisticated electronic equipment correctly.

FIRMWARE UPDATE VIA MIDI: The MF-105M can be enabled

to receive MIDI SysEx data containing the Operating Firmware for

the MIDI MuRF by powering up in what is called "Bootloader Mode".

This is done by setting the LFO and FREQ switch in the rightmost

position and pressing the Bypass switch while the unit is powered up.

The Drive and Bypass lights will blink, followed by all LEDs lighting

up green. This indicates the unit is in Bootloader Mode and can be

sent rmware via a MIDI connection. More information about this

feature as well as tools for downloading rmware can be found on the

www.moogmusic.com website.

POWER: The MF-105M works on +9 volts DC and uses a max of

about 240 milliamperes of current. Use only the power supply supplied

with the MF-105M or the exact equivalent. Power sources rated with

voltages in excess of +9 Volts may cause damage to the MF-105M’s

circuit.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

No comments

Moog MP-201 Technical Information Page 25