Moog MP-201 Technical Information download pdf (Page 34)

Appendix D: MF-105M SPECIFICATIONS

DESCRIPTION:

Analog effects module incorporating two functions: 8 – band Resonant

Filter Bank and 24-Pattern Sequencer triggering Volume Envelopes for 8

Filters with CV and MIDI control.

FRONT PANEL FEATURES:

DRIVE rotary control - adjusts the gain of the audio input to the effect.

OUTPUT rotary control - balances the level of MuRF’s signal when the

effect is on with the bypassed signal when the effect is off.

MIX rotary control - adjusts the ratio of direct to effected signal when the

effect is on.

200 Hz – 3.4 Hz slider controls - sets the gain of the 8 resonant lters.

PATTERN 12-position rotary switch - selects one of 12 animation

patterns in the BASS or MIDS bank.

LFO slider switch – turns on and off the LFO that shifts all 8 lters’

frequencies

FREQ slider switch – changes the voicing of all 8 lters to BASS or

MID frequency range. Also changes bank of patterns.

ENVELOPE rotary control - morphs the shape of the patterns’ envelopes.

RATE rotary control - adjusts the rate of the animation patterns

DRIVE, a three-color LED that shows the level of the input signal.

RATE, a LED that indicates the animation pattern rate as well as MIDI

status.

BYPASS, a two-color indicator LED that tells whether the effect is active

or bypassed.

ON/BYPASS, a rugged, smooth-acting ‘stomp switch’.

JACK PANEL FEATURES:

AUDIO IN " phone jack – accepts any instrument-level or line-level

signal from –16 dBm to +4 dBm. Input impedance is one megohm.

LEFT/MONO OUT " phone jack - -4 dBm nominal maximum output

level; +8dBm absolute maximum output level. Output impedance is

1,000 ohms.

RIGHT OUT " phone jack – 4 dBm nominal maximum output level; +8

dBm absolute maximum output level. Output impedance is 1,000 ohms.

1 2 ... 29 30 31 32 33 34 35 36

No comments

Moog MP-201 Technical Information Page 34