Moog RKP-II User Manual download pdf (Page 57)

7 Operation Performing Functions Tests

7.1.2.6 Limiting the Maximum Flow

Fig. 27: Limiting the Maximum Flow

7.2 Performing Functions Tests

Performing Functions

Tests

Pre-Conditions:

• Initial set-up of the pump is complete: Ö Chap. "7.1 Initial Pump Set-Up",

Page 43

• The end caps on the through drive of the pump stages have been

removed.

• It has been assured that the pump is being supplied with operating fluid.

• The pump has been visually inspected, with particular attention given to

the lines and port connections.

Procedure:

1. Carry out the functions test in accordance with the instructions provided

by the machine / equipment manufacturer.

Pos. Description

1 Adjustment mandrel

2 Cap nut

3 Lock nut

Displacement

V [cm

/R] 1932456380100 140

Pos.1 WS 8 WS 12 WS 10

Pos. 2 WS 24 = 40 Nm +

10 Nm

WS 32 = 80 Nm +

10 Nm

WS 27 = 80 Nm +

10 Nm

Pos. 3 WS 24 = 50 Nm +

10 Nm

WS 32 = 90 Nm +

10 Nm

WS 27 = 90 Nm +

10 Nm

ΔV for 1 mm

adjusting

screw travel

(pitch

1.5 mm/R)

3.6 5.6 6.5 8.9 11.3 11.5

Tab. 13: Adjustments Limiting the Maximum Flow

The functions tests is performed to ensure that the pump has been

installed into the machine / equipment properly.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

Comments to this Manuals

No comments

Moog RKP-II User Manual Page 57

Comments to this Manuals