Moog 500 Series User Manual download pdf (Page 16)

CIRCUIT CONFIGURATION

The ﬁgure below is a simpliﬁed block diagram of the Analog Delay.

MIDI CONTROL OF THE ANALOG DELAY

The following section explains the MIDI implementation of the Analog De-

lay. For information about what MIDI is and how it works, you can go to the

following webpage for tutorials: www.midi.org/aboutmidi/tutorials.php

MIDI CHANNEL

The default MIDI Channel for the Analog Delay is Channel 1. To change this,

send the MIDI channel you wish to change to CC 119 on the existing chan-

nel. The MIDI channel is the value sent. +1 i.e. to set the Delay to receive on

MIDI channel 2 send a value of 1 to CC119. The MIDI LED will ﬂash ORANGE

indicating that the message has been received. The Delay will now only

receive MIDI messages on that channel. The current MIDI Input channel is

stored in memory on power down.

Note: MIDI Clock and System Exclusive messages are NOT Channel Mode

messages, and are received by the Analog Delay regardless of the current

MIDI Input Channel.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

No comments

Moog 500 Series User Manual Page 16