Moog 500 Series User Manual download pdf (Page 5)

5

FRONT PANEL

DRIVE: Sets the input sensitivity of the Analog

Delay providing a 30dB range of adjustment for

optimum signal path, level matching, or over-

driven sounds.

LEVEL LED: Works in conjunction with the

DRIVE control. RED indicates clipping (this can

be used for adding color). ORANGE ﬂashes

indicate the start of limiting.

GREEN indicates the presence of signal at or

below the nominal level. Steady GREEN with

brief, occasional ORANGE ﬂashes indicates the

nominal signal level for best signal-to-noise

ratio.

OUTPUT: Allows gain or attenuation of the out-

put signal for level optimization. The OUTPUT

control is designed so that an overall boost,

attenuation or unity gain state can be achieved

with any DRIVE setting.

TIME LED:

•Flashes RED to indicate the DELAY TIME is

controlled by the TIME knob or via MIDI.

•Flashes GREEN once indicating the Tap Tempo

destination is set to DELAY TIME. Flashes

GREEN when synced to tap tempo beat.

•Flashes ORANGE when synced to MIDI clock.

LFO LED:

•Flashes RED to indicate LFO RATE and

SHAPE, with the transition between on and off

states indicating the selected WAVEFORM.

•Flashes GREEN once indicating the Tap Tempo

destination is set to LFO RATE. Flashes GREEN

when synced to tap tempo beat.

•Flashes ORANGE when synced to MIDI clock.

TIME KNOB: Adjusts delay times from 35-

400mS (0.5x setting) and 70-800mS (1.0x set-

ting). NOTE: Also controllable with the plug-in/

stand-alone editor or via MIDI message. See

separate sections on Tap Tempo and Control

Voltage.

ANALOG DELAY

LEVEL

LFO

TIME

0.5x

1.0x

400

mS

800

mS

200

mS

80

mS

FEEDBACK

8

∞

0

2

4

MIDI

TAP/CV

DRY WET

OUTPUT

0

4 6

100

4 6

10

DRIVE

BYPASS

1 2 3 4 5 6 7 8 9 10 ... 21 22

Comments to this Manuals

No comments