Moog P1600 Operations Instructions download pdf (Page 7)

Jig Assembly

Figure 2

2. Place the short end of each Bolt into the outside holes of the

Cross Strap. PlaceHex Nuts onto each Bolt and ﬁ nger tighten

(Figure 2).

Jig Assembly

Figure 3

3. Turn the Anchor Jig over and place Single Straps over the Bolts

(Figure 3). Use the inside hole of each strap. Place Hex Nuts

onto each Bolt and ﬁ nger tighten.

Jig Assembly

Figure 4

/32 "

11"

diameter

4. Before using the Anchor Jig verify that the center to center

dimensions between the bolts are even (Figure 4). If not, adjust

accordingly. Firmly tighten all Hex Nuts.

Jig Assembly

Figure 5

5. Standard installation without leveling nuts.

Without Leveling Nuts

12 13

14 15

1 2 3 4 5 6 7 8 9

No comments

Moog P1600 Operations Instructions Page 7