Moog MP-201 User Manual Page 2

  • Download
  • Add to my manuals
  • Print
  • Page
    / 52
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 1
MP-201 Users Manual
Page 4
MP-201 Users Manual
Page 5
Thank you and congratulations on your purchase of the MP-201 Multi-Pedal. The
MP-201 Multi-Pedal is an advanced four-channel CV/MIDI footpedal controller.
The analog CV control outputs consist of four ” jacks located on the back of
the unit. The MIDI I/O consists of both USB and DIN MIDI connectors. The signals
at the outputs are determined by the settings of the four Control Channels, each
programmed in a Preset. Each Control Channel features an analog control output
and can simultaneously transmit MIDI Continuous Controller and Program Change
messages on an assignable MIDI Channel.
The MP-201 Multi-Pedal allows you to perform real-time performance gestures
and musical nuances that would otherwise require the coordinated efforts of
many hands and feet to achieve. It is designed to work with the complete line of
Moogerfooger Analog effects, as well as our Voyager and Little Phatty synthesizers,
and other Control Voltage (CV) and MIDI-compatible devices, or software.
The following pages provide descriptions of the operation, features, and the pro-
grammable options of the MP-201. At the end of this booklet you’ll nd technical
specications, service and warranty information, and contact information if should
you need to reach us.
To get started right away, refer to the Instant Gratication section on page 8.
Introduction
Package Contents
The MP-201 Multi-Pedal is shipped with the following items:
1. The MP-201 Multi-Pedal
2. Power Adapter (12VAC, 500mA output)
3. User’s Manual
4. 2.5mm Allen Wrench (for adjusting the footpedal)
In addition to the MP-201 Multi-Pedal and provided accessories, you will need to
supply:
1. An analog CV or MIDI-capable instrument or device
2. Patch cords and/or MIDI cords
NOTE: Be sure to review and understand the input specications of
any equipment to be controlled by the MP-201 before connecting to
ensure compatibility.
Page view 1
1 2 3 4 5 6 7 ... 51 52

Comments to this Manuals

No comments