Moog MP-201 User Manual download pdf (Page 41)

MP-201 User’s Manual

Page 42

MP-201 User’s Manual

Page 43

DESCRIPTION:

PROGRAM CHANGE allows you to select how the Multi-Pedal will respond to MIDI

Program Change messages. The Multi-Pedal responds to Program Change messages

received on MIDI channel 1.

DISPLAY UNITS allows you to select the way data is displayed on the LCD.

When OFF is selected, no data values are displayed in the LCD.

When VOLTS is selected, data is displayed as a voltage level. The voltage range is

displayed to two decimal places: from -5.00 to +5.00V (Bipolar) or 0.00 to +5.00

(Unipolar).

When MIDI is selected, data is displayed as a range of values from 0 – 127 (a value of

64 is the mid-point).

When PRECISION is selected, data is displayed as a range of values from 0 – 4095 (a

value of 2048 is the mid-point).

To make a change to Display Units, press ENTER, then use the VALUE knob to choose

the desired data display type. Press EDIT once to return to the Utilities menus, or twice

to escape.

NOTE: When DISPLAY UNITS = OFF, parameter CV values are

displayed in the Edit Mode menus as Precision data (0-4095).

MIDI In selects which connector(s) receive MIDI data.

MIDI Out selects which connectors transmit MIDI data generated by the Multi-Pedal.

The MERGE USB IN function allows you to mix MIDI data from the USB Input with

MIDI messages generated by the Multi-Pedal and send the result to the selected

output.

The MERGE DIN IN function allows you to mix MIDI data from the MIDI DIN Input

with MIDI messages generated by the Multi-Pedal and send the result to the selected

output.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

No comments

Moog MP-201 User Manual Page 41