Moog MP-201 User Manual download pdf (Page 33)

MP-201 User’s Manual

Page 34

MP-201 User’s Manual

Page 35

LFO RATE

The LFO RATE parameter sets the initial frequency of the LFO; this is the frequency

that the LFO produces when a Preset is called up. The LFO has a frequency range of

0.1Hz (1 cycle every 10 seconds) to 1000 Hz.

If the footpedal is programmed to control the Rate (FPEDAL MODE = RATE), then

the initial LFO frequency will be overridden as soon as the pedal is moved. When

FPEDAL = RATE, the actual LFO frequency range is specied by the programmed

HEEL and TOE values for the selected Channel.

When LFO SYNC is set to ‘MIDI CLOCK’, LFO RATE is used to set the clock divisor

value according to the table above.

LFO AMOUNT

The LFO AMOUNT parameter sets the initial level of the LFO when a Preset is

called up. If the footpedal is programmed to control the Amount (FPEDAL MODE

= AMOUNT), then the initial LFO level will be overridden as soon as the pedal is

moved. When FPEDAL MODE = AMOUNT, the actual range of the LFO level is

specied by the programmed HEEL and TOE values for the selected Channel.

CLOCKS/QUARTER

NOTE

TIME VALUE LCD

DISPLAY

3 1/32 note 1/32

4 Dotted 1/32 note 1/32 DOT

6 1/16 note 1/16

8 Dotted 1/16 note 1/16 DOT

12 1/8 note 1/8

16 Dotted 1/8 note 1/8 DOT

24 Quarter note 1/4

32 Dotted quarter note 1/4 DOT

48 Half note 1/2

64 Dotted half note 1/2 DOT

96 Whole note WH

MIDI Clock Divider Values

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 51 52

No comments

Moog MP-201 User Manual Page 33