Moog MP-201 User Manual download pdf (Page 6)

MP-201 User’s Manual

Page 8

MP-201 User’s Manual

Page 9

Instant Gratication

Follow these steps to experience some of what the MP-201 Multi-Pedal can do.

Unpack and set up the Multi-Pedal. Connect the supplied AC adapter to the POW-

ER IN jack on the back of the Multi-Pedal, and then make additional connections as

shown. For CV connections, use a standard “ patch cord. For MIDI connections,

use a standard MIDI DIN cable

For Analog CV Control -

1. If you plan to use the Multi-Pedal with a Minimoog Voyager or Little

Phatty setup, plug the other end of the patch cord in the FILTER input

jack. Select a highly resonant patch, and turn the instrument’s FILTER

CUTOFF knob to a low setting.

If you plan to use the Multi-Pedal with a Moogerfooger Pedal, set things

up as you normally would with your instrument, and then plug the

other end of the patch cord into one of the following Moogerfooger

pedal jacks:

MF-101: Plug into the CUTOFF jack, and set the FILTER CUTOFF

knob to a low setting. Set the resonance fairly high.

MF-102: Plug into the FREQ jack. Set the FREQ knob CCW.

MF-103: Plug into the RATE jack. Set the RATE knob CCW.

MF-104: Plug into the TIME jack. Set the TIME knob CCW.

MF-105: Plug into the RATE jack. Set the RATE knob to 12:00.

MF-107: Plug into the FREQ jack. Set the FREQ knob CCW.

2. Adjust your monitoring (amp or headphones) for a comfortable

listening level.

1 2 3 4 5 6 7 8 9 10 11 ... 51 52

No comments

Moog MP-201 User Manual Page 6