Moog MP-201 User Manual download pdf (Page 30)

MP-201 User’s Manual

Page 32

MP-201 User’s Manual

Page 33

Storing Presets

To store a Preset, press and release the ENTER/

STORE button. The LCD will display a message

similar to that shown at left. The top line of the

LCD displays the current Preset location, while the

bottom line contains the prompt ‘SAVE PANEL? NO’

(or ‘SAVE PRESET? NO’). ‘NO’ is always the default

here, as it prevents you from accidently overwriting

a Preset.

If you wish to save at the current Preset location, use

the VALUE encoder to switch from ‘NO’ to ‘YES’, and

then press and release the ENTER/STORE button. A

‘PRESET STORED’ message will briey appear, then

you will be returned to the previous operating mode.

If you do not wish to continue the store operation,

simply press EDIT to escape (or press ENTER/

STORE at the ‘NO’ prompt).

To save to a different Preset location, press the

Encoder pushswitch to move the cursor to the top

line of the LCD then use the VALUE encoder to

select the desired location. After making a selection,

move the cursor back to the bottom line, change to

‘YES’ and then press and release ENTER/STORE.

The STORE function is used to save an edited Preset in Edit Mode (SAVE PRESET) or

Performance Mode (SAVE PANEL).

When a Preset is stored in Edit Mode, the store operation only overwrites values

that have been actively edited. When a Preset is stored in Performance Mode (either

Single Channel or Quad Channel Mode), the store operation overwrites initial state

and value with current channel ON/OFF state and current footpedal position on any

Channels that have been changed.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 51 52

No comments

Moog MP-201 User Manual Page 30